1）CBN
The main area of application of CBN cutting inserts is finish turning of hardened steels and grey cast iron. CBN the hardness of which is only exceeded by diamond, has been developed for cutting materials Turning or milling is not a problem for CBN cutting inserts because this cutting material has an extremely high thermal hardness.

2）PCD
PCD consists of diamond crystals which are sintered into a bond matrix (cobalt or tungsten) at high pressure and at high temperatures. Between the individual crystals there is a metal binding phase which is mainly applied to carbide body.Due to the random diamond orientation the PCD layer is formed as an isotropic body which has no preferred cut direction.

PCD closely approximates to a monocrystaline diamond in terms of hardness and its abrasion resistance outperforms carbide by a hundredfold.Turning tools with polycrystalline diamond (PCD) cutting edges are successfully used for the procressing of aluminium, non-ferrous metals and composite materials, preferably in series production and for abrasive materials.

3）CVD

Like PCD CVD is a mixture of a binding agent and diamond. With a ratio of 0,1% binding agent and 99,9% diamond a significantly higher hardness, thermal conductivity and improved cutting edges are obtained. 
The ultra hard cutting material CVD (2,5 times harder than PCD) is most frequently used for processing aluminium and magnesium alloys as well as for non-ferrous metals. Due to the absence of a direction of growth, CVD is considerably tougher than MCD. This is why today CVD tools are mostly used in dressing technology. CVD tools are more sensitive to temperature than MCD tools, therefore adequate cooling must be assured during the dressing process.

4）MCD

MCD is very similar to natural diamond. Both have the same physical properties and an octahedral growth. Similar to synthetic diamonds MCD are made of graphite using the high-pressure and high-temperature process. 
MCDs are synthetically produced diamond blocks which are shaped to rods by sawing or cutting. Here the cutting direction runs along the direction of growth of the diamond.Due to the production process MCDs have a direction of growth.

After the edge calibration by cutting or sawing, the rods are cut to the corresponding length.Due to the direction of growth, please make sure that the rods are correctly fitted in the dressing tool. Depending on the MCD manufacturer, the wear resistance is higher when using a linear or rhombic mounting types.

LINKUT is a high-tech enterprise specializing in the production of superhard cutting tools, and is one of the fastest-growing enterprises in the field of superhard cutting tools in China. LINKUT develops and manufactures PCBN/PCD /MCD/CVD cutting tools for over 13 years.The sales as well as customer service is handled by our professional service teams.